AudioCodes Mediant MSBR Series

Version 7.2 303 Mediant MSBR
Reference Guide 44. http-proxy
44 http-proxy
This command configures HTTP proxy and includes the following subcommands:
 ems-serv (see Section 44.1)
 http-interface (see Section 44.2)
 http-proxy-host (see Section 44.3)
 http-proxy-serv (see Section 44.4)
 settings (see Section 44.5)
44.1 http-proxy ems-serv
This command configures the EMS Services table, which lets you define a single HTTP-
based EMS service.
Syntax
(config-network)# http-proxy ems-serv <Index>
(ems-serv-<Index>)#
Command Description
dev-login-int
Assigns a local, listening HTTP interface:port (see Section
44.2) for communication with the client.
ems-int
Assigns a local, listening HTTP interface:port (see Section
44.2) for communication with the EMS.
primary-server
Configures the address of the primary EMS server.
secondary-server
Configures the address of the secondary EMS server.
service-name
Configures an arbitrary name to easily identify the service.
Command Mode
Privileged User
Example
This example configures an EMS services where the EMS address is 10.15.7.8:
(config-network)# http-proxy ems-serv 0
(ems-serv-0)# service-name EMS
(ems-serv-0)# ems-int
(ems-serv-0)# primary-server 10.15.7.8
(ems-serv-0)# dev-login-int