AudioCodes Mediant MSBR Series

Reference Guide 6. Show Commands
Version 7.2 131 Mediant MSBR
6.3.27 show data qos
This command displays quality of service statistics according to specified criteria.
Syntax
show data qos
Command Description
match-map
{atm|cellular|efm|
fiber|gigabitether
net|gre|input|ipip
|ipipv6|ipv6ip|l2t
p|loopback|output|
pppoe|pptp|vlan}
<Interface ID>
Displays QoS statistics for a group of match-maps or a
specific match-map.
queue
{atm|cellular|efm|
fiber|gigabitether
net|lan}
<Slot/Port>
Displays QoS statistics for a group of queues or a specific
queue.
service-map
{atm|cellular|efm|
fiber|gigabitether
net|lan}
<Slot/Port>
Displays QoS statistics for a group of service-maps or a
specific service-map.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays QoS statistics for LAN/WAN queues:
show data qos queue
Global statistics for LAN Queues:
No available queue statistics.
Global statistics for WAN Queues:
GigabitEthernet 0/0:
No available queue statistics.
Fiber 0/1:
No available queue statistics.