AudioCodes Mediant MSBR Series User Manual

Reference Guide 6. Show Commands
Version 7.2 165 Mediant MSBR
6.12.7 show voip ids
This command displays the Intrusion Detection System (IDS) blacklist of remote hosts (IP
addresses / ports) considered malicious.
Syntax
# show voip ids {blacklist active|active-alarm}
# show voip ids active-alarm {all|match <ID> rule <ID>}
Command Description
active-alarm
Displays all active blacklist alarms:
 all (Displays all active alarms)
 match (Displays active alarms of an IDS matched ID
and rule ID)
blacklist active
Displays blacklisted hosts.
Command Mode
Privileged User
Related Commands
 ids policy
 ids rule
 clear voip ids blacklist
Example
 Displaying the IDS blacklist:
# show voip ids blacklist active
Active blacklist entries:
10.33.5.110(NI:0) remaining 00h:00m:10s in blacklist
Where SI is the SIP Interface, and NI is the Network interface.
 Displaying the blacklist of all active IDS alarms:
# show voip ids active-alarm all
IDSMatch#0/IDSRule#1: minor alarm active.
 Displaying details regarding an active IDS alarm of the specified match and rule IDs:
# show voip ids active-alarm match 0 rule 1
IDSMatch#0/IDSRule#1: minor alarm active.
- Scope values crossed while this alarm is active:
10.33.5.110(SI0)

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English