AudioCodes Mediant MSBR Series User Manual

Version 7.2 509 Mediant MSBR
Reference Guide 73. WAN Access Commands
73.2.9.4 usb-modeswitch
This command sets the USB modeswitch settings. When a USB device is plugged in for the
first time, it might perform like a flash storage. The MSBR should make the storage device
disappear and changes it to a communications device to work with it under the Cellular
interface.
The usb_modeswitch command can send a provided message to the device, to initiate the
mode switching. Using the parameters in the “modem-details” command, and the usb-
modeswitch sub-menu, it changes the device "default-product-id" to the "modem-product-id"
and the “default-vendor id” to “vendor-id”.
Syntax
usb-modeswitch configuration-id [index]
usb-modeswitch enable
usb-modeswitch message [message text}
Command Description
configuration-id Defines an optional configuration-id to the modeswitch
parameters
configuration-id index Defines the Configuration index.
enable Enables the USB modeswitch.
message Defines an optional USB modeswitch message.
message text Defines the actual USB modeswitch message text.
Command Mode
Privileged User
Example
This example enables the USB modeswitch on the following modem-details:
(config-data)# interface cellular 0/0
(conf-cellular)# adv
(adv-cell-config)# modem-details vendor-id AAFF
(adv-cell-config)# modem-details product-id 12AB
(adv-cell-config)# modem-details default-product-id 34BC
(adv-cell-config)# usb-modeswitch enable
Setting modem details is mandatory before running the command
"usb-modeswitch enable":
(adv-cell-config)# usb-modeswitch enable
Please set all modem details to enable USB modeswitch operation

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English