AudioCodes Mediant MSBR Series

Version 7.2 589 Mediant MSBR
Reference Guide 74. Layer-2 (LAN) Commands
74.4 Spanning Tree Commands
The section below describes Spanning Tree commands.
74.4.1 Spanning Tree General Commands
The sub-section below describes Spanning Tree General commands.
74.4.1.1 spanning-tree
This command enables / disables the spanning tree in the system.
Syntax
spanning-tree
no spanning-tree
Command Mode
Privileged User
Example
This example enables the spanning-tree:
(config data)# spanning-tree
74.4.1.2 spanning-tree priority
This command sets the priority of the device.
Syntax
spanning-tree priority <value>
Command Description
<value> The range is 0 - 61440 in multiples of 4096
Default
32768
Note
Under configure terminal.
Command Mode
Privileged User