Reference Guide 6. Show Commands
Version 7.2 139 Mediant MSBR
6.6 show network
This command displays networking information.
Syntax
show network
Command Description
See Section 6.6.1
See Section 6.6.2
See Section 6.6.3
See Section 6.6.4
See Section 6.6.5
See Section 6.6.6
See Section 6.6.7
See Section 6.6.8
See Section 6.6.9
Command Mode
Basic User and Privileged User
6.6.1 show network access-list
This command displays the network access list (firewall) rules, which are configured in the
Firewall table.
Syntax
show network access-list
Command Mode
Basic User and Privileged User
Example
show network access-list
L# Source IP /Pref SrcPort Port Range Protocol Action Count
---- --------------- ---- ------- ------------- -------- ------
0 10.6.6.7 / 0 0 0 - 65535 Any ALLOW 616
Total 1 active firewall rules.