AudioCodes Mediant MSBR Series

Reference Guide 526 Document #: LTRT-17939
Mediant MSBR
Command Description

-22.5 dB
Default
By default, the line buildout loss is 0 dB.
Command Mode
Privileged User
Example
This example sets the line buildout loss to -7.5 dB on t1 port 0/0:
(conf-if-t1 0/0)# line-buildout-loss -7.5
73.4.14.6 max-cable-loss
This command specifies the loss due to cable length on the current T1 interface.
Syntax
max-cable-loss <loss>
Command Description
<loss> Defines the cable loss [dB]:
 0.6 dB – Cable length 0-133ft
 1.2 dB – Cable length 134-266ft
 1.8 dB – Cable length 267-399ft
 2.4 dB – Cable length 400-533ft
 3 dB – Cable length 534-655ft
Default
By default, the maximum cable loss is 0.6 dB.
Command Mode
Privileged User
Example
This example sets the cable loss to 3 dB on T1 Port 0/1:
(conf-if-t1 0/1)# max-cable-loss 3
73.4.14.7 loopback
This command specifies loopback on the current T1 WAN interface.