AudioCodes Mediant MSBR Series User Manual

Version 7.2 371 Mediant MSBR
Reference Guide 59. gateway
Command Description
'encoding=hex' at the end, (3): format: User-to-User with
text presentation
uui-ie-for-ip2tel
Enable User-User IE to pass in Setup from IP to ISDN
uui-ie-for-tel2ip
Enable User-User IE to pass in Setup from ISDN to IP
wait-befor-pstn-rel-
ack
Defines the time
out (in milliseconds) to wait for the release
ACK from the PSTN before releasing the channel.
wait-for-busy-time
Time to wait to detect busy and reorder tones. Currently
used in semi supervised PBX transfer
warning-tone-duration
OfHook Warning Tone Duration [Sec]
xfer-across-trunk-
groups
if set ECT RLT 2BCT call transfer is allowed across
different trunks and trunkgroups
xfer-cap-for-data-
calls
0: ISDN Transfer Capability for data calls will be 64k
unrestricted (data), 1:ISDN Transfer Capabilityfor Data
calls will be set according to ISDNTransferCapability
parameter
xfer-prefix-ip2tel
Defines the prefix that is added to the destination number
received in the SIP Refer-To header (for IP-to-Tel calls).
59.4 dtmf-supp-service
This command configures the DTMF supplementary services.
Syntax
(config-voip)# gateway dtmf-supp-service
Command Description
dtmf-and-dialing
See Section 59.4.1.
isdn-supp-serv
See Section 0.
supp-service-settings
See Section 59.4.3.
59.4.1 dtmf-and-dialing
This command configures DTMF and dialing parameters.
Syntax
(config-voip)# gateway dtmf-supp-service dtmf-and-dialing
(gw-dtmf-and-dial)#
Command Description
auto-dtmf-mute
Enables automatic muting of DTMF digits when out-of-
band DTMF transmission is used.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English