Reference Guide 370 Document #: LTRT-17939
Mediant MSBR
Command Description
RTCP activation policy.
rtp-only-mode
immediately. -1 - takes the RTPONLYMODE global value
per gatewa0 - regular call establishment. 1 - The RTP
channel open for Rx & Tx. 2-The RTP channel open only
for Tx 3 -The RTP cha
send-screen-to-ip
Override screening indicator value in Setup messages to
IP
send-screen-to-isdn
Override screening indicator value in Setup messages to
ISDN
Enable SetupAck messages for overlap mode
SilenceSupp in SDP used for fax VBD
if defined, enforce this Q.931 Source Number Plan
if defined, enforce this Q.931 Source Number Type
Swap Redirect and Called numbers
tdm-over-ip-initiate-
Time between first INVITE issued within the same trunk
(msec)
tdm-over-ip-min-calls
Minimum connected calls for trunk activation, if 0 - trunk is
always active
Time between call release and new INVITE(msec)
Enable gateway to maintain a permanent RTP connection
tel-to-ip-dflt-redir-
Tel2IP Default Redirect Reason
third-party-
Enables Third Party Call Control Transcoding functionality
Delay time before playing Reorder tone
transparent-on-data-
In case the transfer capability of a call from ISDN is data
open with transparent coder
Trunk alarm call disconnect timeout in seconds
Configure trunk groups on which to send additional IE
trunk-restart-mode-on-
Trunk Restart Mode on Power Up.
trunk-status-reporting
When TrunkGroup #1 is present and active response to
options and/or send keep-alive to associated proxy(ies)
use-to-header-as-
Use the user part of To header URL as called number (IP-
>TEL)
user-info
Provides a link to the user information file, to be
downloaded using Automatic Update.
The file name to be loaded using TFTP
usr2usr-hdr-frmt
(0): X-UserToUser, (1): format: User-to-UserUser with
protocol discriminator, (2): format: User-to-User with
To Next Page
Loading...
Need help?
General
