Version 7.2 451 Mediant MSBR
Reference Guide 68. sbc
(ip-inbound-manipulation-0)# activate
68.5.2 ip-outbound-manipulation
This command configures the Outbound Manipulations table, which lets you define IP-to-IP
Outbound Manipulation rules. An Outbound Manipulation rule defines a manipulation action
for the SIP Request-URI user part (source or destination) or calling name of outbound SIP
dialog requests.
Syntax
(config-voip)# sbc manipulation ip-outbound-manipulation <Index>
(ip-outbound-manipulation-<Index>)#
Command Description
calling-name-pattern
Defines the prefix of the calling name (caller ID). The
calling name appears in the SIP From header.
dest-tags
Assigns a prefix tag to denote destination URI user names
corresponding to the tag configured in the associated Dial
Plan.
dst-host
Defines the destination SIP URI host name - full name,
typically located in the Request-URI and To headers.
Defines the IP Group to where the INVITE is to be sent.
dst-user-name-pattern
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
is-additional-
manipulation
Determines whether additional manipulation is done for the
table entry rule listed directly above it.
leave-from-right
Defines the number of digits to keep from the right of the
manipulated item.
manipulated-uri
Defines the element in the SIP message that you want
manipulated.
manipulation-name
Defines a descriptive name, which is used when
associating the row in other tables.
message-condition-name
Assigns a Message Condition rule as a matching
characteristic. Message Condition rules define required
SIP message formats.
prefix-to-add
Defines the number or string to add in the front of the
manipulated item.
privacy-restriction-
mode {dont-change-
privacy|remove-
restriction|restrict|t
Defines user privacy handling (i.e., restricting source user
identity in outgoing SIP dialogs).
re-route-ip-group-name
Defines the IP Group that initiated (sent) the SIP redirect
response (e.g., 3xx) or REFER message.
remove-from-left
Defines the number of digits to remove from the left of the
manipulated item prefix.