Reference Guide 116 Document #: LTRT-17939
Mediant MSBR
6.3.18 show data interface
This command displays information about each MSBR interface.
Syntax
show data interface
Command Description
atm
Displays information about the ATM on xDSL interfaces
(per DSL line group and ATM sub-interface ID).
bvi <Bridge
Displays information about the bridge interface.
Displays information about the cellular 3G interface.
Displays a description of the interfaces.
dot11radio
Displays status information about the MSBR router's
wireless (WiFi) module.
dsl
<Slot/Port>|{brief}
Displays information about the ADSL/VDSL interfaces.
 Slot/Port (Displays detailed information about the
ADSL/VDSL interfaces)
 Brief (Displays summarized information about the
ADSL/VDSL interfaces)
efm
Displays information about Ethernet in the First Mile
(EFM) interface's slot, port and VLAN ID.
fastethernet
<Slot/Port>
Displays information about the Fast Ethernet interface's
slot and port.
 slot/port (FastEthernet interface slot and port)
fiber
<Slot/Port.vlanID>
Displays information about the Fiber interface.
 Slot/Port.vlanID
gigabitethernet
Displays information about the Gigabit Ethernet
interface's slot and port. VLAN ID is optional.
gre <ID>
Displays information about the Generic Routing
Encapsulation (GRE) tunnel interfaces, according to
interface ID. GRE tunneling encapsulates packets so
they can be tunneled.
ipip <ID>
Displays information about the IP-IP tunnel interfaces,
according to interface ID. IP-IP Tunnel protocol
encapsulates IP packets in IP to create a tunnel between
two routers. The protocol enables multiple network
schemes.
ipipv6 <ID>
Displays information about the IP-IP version 6 tunnel
interfaces, according to interface ID.
ipv6ip <ID>
Displays information about the IP version 6 - IP tunnel
interfaces, according to interface ID.
l2tp <ID>
Displays information about the Layer 2 Tunneling
Protocol (L2TP) interfaces, according to interface ID.
To Next Page
Loading...
Need help?
General
