AudioCodes Mediant MSBR Series User Manual

Version 7.2 417 Mediant MSBR
Reference Guide 63. media
Example
This example configures the fax transport type to T.38:
(config-voip)# media fax-modem
(media-fax-modem)# fax-transport-mode t.38-relay
(media-fax-modem)# activate
63.2 ipmedia
This command configures various IP-media parameters.
Syntax
(config-voip)# media ipmedia
(media-ipmedia)#
Command Description
agc-disable-fast-
adaptation
Disables the AGC (Automatic Gain Control) Fast
Adaptation mode.
agc-enable
Activates the AGC (Automatic Gain Control).
agc-gain-slope
Defines the AGC convergence rate.
agc-max-gain
Defines the maximum signal gain of the AGC [dB].
agc-min-gain
Defines the minimum signal gain of the AGC [dB].
agc-redirection
Redirects the AGC output towards the TDM instead of
towards the network.
agc-target-energy
Defines the target signal energy level of the AGC [-dBm]
answer-detector-
activativity-delay
Defines the time between activating the Answer Detector
and the time that the detector actually starts to work [100
ms].
answer-detector-enable
[off|on]
Enables the AD (Answer Detector).
answer-detector-
redirection
Redirects the AD (Answer Detector) towards the network
instead of TDM.
answer-detector-
sensitivity
Defines the AD (Answer Detector) sensitivity.
answer-detector-
silence-time
Defines the Answer Detector's silence time period from no
speech input until sending the End Of Speech event [100
ms].
energy-detector-enable
Activates the Energy Detector.
energy-detector-
redirection
Redirect the Energy Detector towards the network instead
of TDM.
energy-detector-
sensitivity
Defines the Energy Detector's sensitivity.
energy-detector-
threshold
Defines the ED's (Energy Detector's) threshold according
to the formula: -44 + (EDThreshold * 6) [- dBm].

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English