AudioCodes Mediant MSBR Series User Manual

Reference Guide 388 Document #: LTRT-17939
Mediant MSBR
Command Mode
Privileged User
59.5.13 src-number-map-tel2ip
This command configures the Source Phone Number Manipulation for Tel-to-IP Calls table,
which lets you define manipulation rules for manipulating the source number for Tel-to-IP
calls.
Syntax
(config-voip)# gateway manipulation src-number-map-tel2ip <Index>
(src-number-map-tel2ip-<Index>)#
Command Description
dst-pattern
Defines the destination (called) telephone number prefix
and/or suffix.
is-presentation-
restricted
{allowed|not-
configured|restricted}
Enables caller ID.
manipulation-name
Defines a descriptive name, which is used when
associating the row in other tables.
npi {e164-public|not-
included|private|unkno
wn}
Defines the Numbering Plan Indicator (NPI).
num-of-digits-to-leave
Defines the number of digits that you want to keep from
the right of the phone number.
prefix-to-add
Defines the number or string that you want added to the
front of the telephone number.
remove-from-left
Defines the number of digits to remove from the left of the
telephone number prefix.
remove-from-right
Defines the number of digits to remove from the right of the
telephone number prefix.
src-pattern
Defines the source (calling) telephone number prefix
and/or suffix.
src-trunk-group-id
Defines the source Trunk Group for Tel-to-IP calls.
suffix-to-add
Defines the number or string that you want added to the
end of the telephone number.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English