Reference Guide 534 Document #: LTRT-17939
Mediant MSBR
Command Description
‘no’ at prefix of command Disables CHAP on this PPP/MLP serial interface.
Default
By default CHAP is enabled
Command Mode
Privileged User
Example
This example enables CHAP:
(conf-if-serial-ppp 0/0)# authentication chap
73.4.15.9 authentication pap (PPP/MLP over T1)
This command enables Password Authentication Protocol (PAP) to be used by this PPP/MLP
serial interface.
Syntax
authentication pap
Command Description
‘no’ at prefix of command Disables PAP on this PPP/MLP serial interface.
Default
By default, PAP is enabled.
Command Mode
Privileged User
Example
This example enables PAP on the MLP serial interface 0/0:
(conf-if-serial-mlp 0/0)# authentication pap
73.4.15.10 authentication ms-chap (PPP/MLP over T1)
This command enables Microsoft Challenge Handshake Authentication Protocol
(MS-CHAP) to be used by this PPP/MLP serial interface
Syntax
authentication ms-chap
To Next Page
Loading...
