AudioCodes Mediant MSBR Series User Manual

Reference Guide 586 Document #: LTRT-17939
Mediant MSBR
74.2.12 service tcp keepalives
This command controls the tcp keepalive functionality of newly created sockets.
Syntax
service tcp keepalives enable
service tcp keepalives interval <interval>
service tcp keepalives probe <probe>
service tcp keepalives time <time>
Command Description
enable Enables the TCP keepalive. The default value
is "Disabled".
interval
Defines t
he interval between sub sequential
keepalive probes in seconds. The default value
is 75 seconds. The range is1-65355.
probe Defines the number of unacknowledged probes
to send before considering the connection
inactive and notifying the application layer. The
default value is 9 probes. The range is 1-65355.
time Defines the interval between the las
t data
packet sent and the first keepalive probe. The
default value is 7200 seconds. The range is 1-
65355.
Note
 This command is applicable only to data-router functionality.
 The default values are active only if keep-alive is enabled.
Command Mode
Privileged User
Example
This example enables tcp keepalives.
(config-data)# service tcp keepalives enable

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English