AudioCodes Mediant MSBR Series

Version 7.2 253 Mediant MSBR
Reference Guide 25. snmp
25.3 snmp trap-destination
This command configures the SNMP Trap Destinations table, which configures SNMP trap
destinations (Managers).
Syntax
(config-system)# snmp trap-destination <Index>
(trap-destination-<Index>)#
Command Description
ip-address
Configures the SNMP manager's IP address.
port
Configures the SNMP manager's port.
reset-trap-user
Returns to the default trap user.
send-trap
{disable|enable}
Enables the sending of traps to the SNMP manager.
trap-user
SNMPv3 USM user or SNMPv2 user to associate with
this trap destination.
Command Mode
Privileged User
Example
This example demonstrates configuring a trap destination:
(config-system)# snmp
(snmp)# trap-destination 0
(trap-destination 0)# ip-address 10.13.4.145
(trap-destination 0)# send-trap