EasyManua.ls Logo

AudioCodes Mediant MSBR Series

AudioCodes Mediant MSBR Series
801 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Guide 376 Document #: LTRT-17939
Mediant MSBR
Command Description
mwi-subs-rtry-time
MWI service subscriptions retry time after last subscription
failure, in seconds.
mx-3w-conf-onboard
Max on-board conference calls.
nb-of-cw-ind
Number of call waiting indications to be played to the user.
nrt-sub-retry-time
NRT subscribe retry time.
nrt-subscription
Enable subscription for Call forward ringtone indicator
services.
precedence-ringing
Index of the first Call RB tone in the call-progress tones
file.
qsig-calltransfer-
reverse-enddesignation
QSIG Call Transfer Reverse End Designation.
reminder-ring
{disable| enable}
Enables the reminder ring.
send-all-cdrs-on-rtrv
Send only chosen coder or all supported coders.
should-subscribe
Related to Subscribe/UnSubscribe buttons.
snd-isdn-ser-aftr-
restart
ISDN SERVICE message is sent after restart.
sttr-tone-duration
Time for playing confirmation tone before normal dial tone
is played (msec).
subscribe-to-mwi
Enable subscription for MWI service.
time-b4-cw-ind
Time before call waiting indication is sent to a busy line, in
seconds.
time-between-cw
Time between one call waiting indication to the next, in
seconds.
transfer-prefix
Prefix added to the called number of a transferred call.
waiting-beep-dur
Call Waiting tone beep length (msec).
Command Mode
Privileged User
Example
This example enables the reminder ring feature:
(config-voip)# gateway dtmf-supp-service supp-service-settings
(gw-suppl-serv)# reminder-ring enable
(gw-suppl-serv)# reminder-ring enable
59.5 manipulation
This subcommand configures the gateway's advanced parameters.
Syntax
(config-voip)# gateway manipulation

Table of Contents

Other manuals for AudioCodes Mediant MSBR Series

Related product manuals