AudioCodes Mediant MSBR Series User Manual

Reference Guide 390 Document #: LTRT-17939
Mediant MSBR
Command Description
rel-cause
Defines a Q.931 release code.
Command Mode
Privileged User
Example
This example configures an ISDN release code 17 for alternative routing:
(config-voip)# gateway routing alt-route-cause-ip2tel 0
(alt-route-cause-ip2tel-0)# rel-cause 17
(alt-route-cause-ip2tel-0)# activate
59.6.2 alt-route-cause-tel2ip
This command configures the Reasons for Tel-to-IP Alternative Routing table, which lets you
define SIP response codes that if received from the IP side, the device reroutes the call to an
alternative destination.
Syntax
(config-voip)# gateway routing alt-route-cause-tel2ip <Index>
(alt-route-cause-tel2ip-<Index>)#
Command Description
rel-cause
Defines a SIP response code.
Command Mode
Privileged User
Example
This example configures a SIP response code 406 for alternative routing:
(config-voip)# gateway routing alt-route-cause-ip2tel 0
(alt-route-cause-tel2ip-0)# rel-cause 406
(alt-route-cause-tel2ip-0)# activate
59.6.3 fwd-on-bsy-trk-dst
This command configures the Forward on Busy Trunk Destination table, which lets you define
alternative routing rules for forwarding (i.e., call redirection) IP-to-Tel calls to an alternative
IP destination using SIP 3xx responses.
Syntax
(config-voip)# gateway routing fwd-on-bsy-trk-dst <Index>
(fwd-on-bsy-trk-dst-<Index>)#

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English