Version 7.2 563 Mediant MSBR
Reference Guide 74. Layer-2 (LAN) Commands
74.2.3.5 ip dhcp pool
This command assigns a pool on a specified interface and enters the pool configuration.
Syntax
ip dhcp pool <interface name> <interface ID>
Command Description
<interface name> Defines interface naming on the interface command.
Interface Name Interface Type Interface ID
gigabitethernet GigabitEthernet interface slot
and port (VLAN ID is optional)
[SLOT/PORT.VLANID]
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA
Related Commands
service dhcp
The ip dhcp pool command is also available from the interface configuration sub-directory.
See ip dhcp-server on page 554.
Command Mode
Privileged User
Example
This example enters IP DHCP POOL on VLAN 5.
(config data)# ip dhcp pool vlan 5