AudioCodes Mediant MSBR Series User Manual

Version 7.2 503 Mediant MSBR
Reference Guide 73. WAN Access Commands
Command Description
ms-chap2 Defines the Microsoft Challenge Handshake
Authentication Protocol 2 as PPP authentication
protocol.
Default
All 4 authentication protocols are set as ON.
You can disable some protocol using “no ppp authentication <protocol>” command
Command Mode
Privileged User
Example
This example disables the authentication protocol.
(config-data)# interface cellular 0/0
(conf-cellular)# no ppp authentication chap
73.2.3 apn
This command sets the Access Point Name (APN) used by the cellular interface.
This command is available in the “conf-cellular” configuration context.
Syntax
apn <apn-string>
Default
The default APN is “uinternet”.
Command Mode
Privileged User
Example
This example sets the APN:
(config-data)# interface cellular 0/0
(conf-cellular)# apn internetg
73.2.4 phone
This command sets the telephone number (dial-string) used by the cellular interface.
This command is available in the “conf-cellular” configuration context.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English