AudioCodes Mediant MSBR Series User Manual

Reference Guide 350 Document #: LTRT-17939
Mediant MSBR
Example
This example shows how to configure an IP Profile:
(config-voip)# coders-and-profiles ip-profile 0
(ip-profile-0)# group-name ITSP
(ip-profile-0)# activate
58.5 tel-profile
This command configures the Tel Profiles table, which lets you define Tel Profiles.
Syntax
(config-voip)# coders-and-profiles tel-profile <Index>
(tel-profile-<Index>)#
Command Description
call-priority-mode
Configures the call priority mode.
coders-group
Configures the coders group name.
current-disconnect
Enables current disconnect.
dial-plan-index
Configures the dial plan index.
digit-delivery
Enables automatic digit delivery to the Tel side after the
line is off-hooked or seized.
digital-cut-through
Enables a call connection without the On-Hook/Off-Hook
process 'Cut-Through'.
disconnect-on-busy-
tone
Releases the call if the gateway receives a busy or fast
busy tone before the call is answered.
dtmf-volume
Configures the DTMF generation volume.
early-media
Enables early media.
echo-canceller
Enables echo cancellation (i.e., echo from voice calls is
removed).
echo-canceller-nlp-
mode
Configures EC NLP mode.
enable-911-psap
Enables 911 PSAP.
enable-agc
Activates AGC (Automatic Gain Control).
enable-did-wink
Enables support for DID lines using Wink.
enable-voice-mail-
delay
Enables voice mail delay.
fax-sig-method
Configures using H.323/Annex D procedure for real time
FAX relay.
flash-hook-period
Configures the flashhook detection and generation period
(in msec).
fxo-double-answer
Enables FXO double answer. All incoming TEL2IP call are
refused.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English