AudioCodes Mediant MSBR Series User Manual

Reference Guide 604 Document #: LTRT-17939
Mediant MSBR
75.1.3 Acquiring IPv6 Address from DHCPv6 Server
75.1.3.1 ipv6 address dhcp
This command provides support for configuring the device as a DHCPv6 client to obtain an
IPv6 address from a DHCPv6 server, according to RFC 3315. The device as a DHCPv6 client
also supports the Rapid Commit option. This option lets the device quickly obtain
configuration parameters from the DHCP server through a rapid two-message exchange
(solicit, reply), instead of the usual four-message exchange (solicit, advertise, request, reply).
Use no ipv6 address to disable this command.
Syntax
# ipv6 address dhcp [rapid-commit]
# no ipv6 address
Note
 This command is applicable only to data-router functionality.
 The installed Software License Key must contain the IPv6 Feature Key.
 Rapid Commit must be supported and enabled on the DHCP server as well.
 The received IPv6 address can be viewed using the show data interfaces
<interface> command.
Command Mode
Privileged User
Example
This example configures the device as a DHCPv6 client.
(config-data)# interface gigabitethernet 0/0
(conf-if-GE 0/0)# ipv6 address dhcp

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English