Version 7.2 603 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Command Description
port desc Can be any of the following:
• eq - Defines a single port
• range - Defines a range of ports
• dscp - Match by Differentiated Services Code Point
value and mask
• established - Accept connection
• log - Log matches
•
stateless - Accept packet
port number Defines the port number [1-65535].
extended IPv6 access-list
number
Defines the extended IPv6 access-list number in number
(100-9999) or word format.
postacl
•
dscp - Match by Differentiated Services Code Point
value and mask
• established - Accept connection
• log - Log matches
•
stateless - Accept packet
Note
This command is applicable only to data-router functionality.
Command Mode
Privileged User
Example
This example adds an access list entry.
(config-data)# ipv6 access-list extended 100
To Next Page
Loading...
