AudioCodes Mediant MSBR Series User Manual

Reference Guide 64 Document #: LTRT-17939
Mediant MSBR
VLAN 1 unassigned Connected Up
Internal-LAN 1 169.254.254.253 Connected Up
BVI 1 192.168.0.1 Connected Up
dot11radio 1 unassigned Disabled Down
Cellular 0/0 0.0.0.0 Disabled Down
After the timer expires, the commands are executed:
# sh d ip int br
Interface IP Address Status Protocol
GigabitEthernet 0/0 10.31.2.39 Connected Up
Fiber 0/1 unassigned Enabled Up
EFM 0/2 unassigned Connected Up
ATM 0/2 0.0.0.0 Disabled Down
VLAN 1 unassigned Connected Up
Internal-LAN 1 169.254.254.253 Connected Up
BVI 1 192.168.0.1 Connected Up
dot11radio 1 unassigned Disabled Down
Cellular 0/0 0.0.0.0 Disabled Down
5.8 debug cwmp send-connection-request
This command sends a connection request to the ACS to start a TR-069 (CWMP) session
with the device.
Syntax
debug cwmp send-connection-request
Default
NA
Command Mode
All
Related Commands
(config-system)# cwmp
(cwmp-tr069)# send-connection-request
5.9 debug data-syslog
This command configures sending data networking debugging messages to Syslog.
Syntax
# debug data syslog

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English