Reference Guide 5. Debug Commands
Version 7.2 67 Mediant MSBR
Example
This example configures debugging DHCP v6 client functioning:
# debug dhcpv6_client
5.12 debug dhcpv6_server
This command configures debugging Dynamic Host Configuration Protocol (DHCP) version
6 server processing.
Syntax
# debug dhcpv6_server
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example configures debugging DHCP v6 server processing:
# debug dhcpv6_server
5.13 debug dial plan
This command checks whether a specified Dial Plan contains specific digits.
Syntax
# debug dial-plan <Dial Plan Name> match-digits <Digits to Match>
Command Mode
Privileged User
Example
Searching for digits "2000" in Dial Plan 1:
# debug dial-plan 1 match-digits 2000
Match succeeded for dial plan 1 and dialed number 2000. Returned
tag RmoteUser
To Next Page
Loading...
