Reference Guide 772 Document #: LTRT-17939
Mediant MSBR
76.5.3 ip access-list standard
This command provides support for assigning a sequence number (ID) to an IP Access List
rule and re-sorting the order of rules within an Access List.
Syntax
ip access-list standard <access list id>
Command Description
access list id Defines the standard IP access-list number. The range is 1-99.
Note
This command is applicable only to data-router functionality.
Command Mode
Privileged User
Example
This example defines an Access List with an access list number ID.
(config-data)# ip access-list standard 18
76.5.4 <rule id> deny|permit
This command defines a rule with a rule number for the Access List.
Syntax
<rule id> {permit|deny} <rule options… >
Command Description
rule id Defines the Rule ID. The range is 1 to 2147483647.
Note
This command is applicable only to data-router functionality.
Command Mode
Privileged User
Example
This example defines a rule with a rule number for the Access List.
(config-data)# ip access-list standard 1
To Next Page
Loading...
