AudioCodes Mediant MSBR Series

Reference Guide 46 Document #: LTRT-17939
Mediant MSBR
5.2 debug adsl-firmware
This command configures the method for copying the firmware file.
Syntax
# debug adsl-firmware <tftp | usb>
Command Description
tftp
 [A.B.C.D] = Configures the TFTP server address
 old-image = Configures using the old-image for
copying the firmware file
usb
 [VRX File Name] = Configures the Visual ReportX
Data file name
 old-image = Configures using the old-image for
copying the firmware file
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example configures the USB method of copying the firmware file:
# debug adsl-firmware usb usb
5.3 debug auxilary-files
This command debugs loaded Auxiliary files.
Syntax
# debug auxilary-files {dial-plan|user-info}
Command Description
dial-plan
Debugs the dial plan (see Section 5.4)
user-info
Debugs the User Info file (see Section 5.3.2).
Command Mode
Privileged User