Version 7.2 421 Mediant MSBR
Reference Guide 63. media
Example
This example enables SRTP:
(config-voip)# media security
(media-security)# media-security-enable on
(media-security)# activate
63.5 settings
This command configures various media settings.
Syntax
(config-voip)# media settings
(media-settings)#
Command Description
Defines the AMR payload format.
G729EVLocalMBS
Defines the maximum generation bitrate of the G729EV
coder for a specific channel.
G729EVMaxBitRate
Defines the
maximum generation bitrate for all participants
in a session using G729EV coder.
G729EVReceiveMBS
Defines the maximum generation bitrate of the G729EV
coder to be requested from the other party.
NewRtcpStreamPackets
Defines the minimal number of continuous RTCP packets,
allowing latching an incoming RTCP stream.
NewRtpStreamPackets
Defines the minimal number of continuous RTP packets,
allowing latching an incoming RTP stream.
NewSRTPStreamPackets
Defines the minimal number of continuous RTP packets,
allowing latching an incoming RTP stream during SRTP
session.
NewSRtcpStreamPackets
Defines the minimal number of continuous RTCP packets,
allowing latching an incoming RTCP stream during SRTP
session.
TimeoutToRelatchRTCPMs
ec
If a channel latched on an incoming RTCP stream, it
cannot relatch onto another one until no packets of the old
stream arrive during the timeout (msec).
TimeoutToRelatchRTPMse
c
A channel during RTP session cannot relatch onto
RTP/RTCP/T38 stream until no RTP packets arrived from
current stream during the timeout (msec).
TimeoutToRelatchSRTPMs
ec
A channel during SRTP session cannot relatch on another
RTP/RTCP/T38 stream until no RTP packets arrived from
current stream during the timeout (msec).
TimeoutToRelatchSilenc
eMsec
A channel in silence mode during RTP/SRTP session
cannot relatch on another RTP/RTCP/T38 stream until no
packets arrived from current stream during the timeout
(msec).
To Next Page
Loading...
Need help?
General
