Version 7.2 541 Mediant MSBR
Reference Guide 73. WAN Access Commands
73.4.16.6 ip dns-server
This command specifies the primary and secondary DNS servers to be used by this multilink
interface.
Syntax
ip dns-server <mode> <a.b.c.d> <e.f.g.h>
Command Description
mode The DNS servers addressing modes are:
‘automatic’ – DNS servers’ IP addresses will be
accepted from peer during PPP negotiation.
‘manual’ – Sets static DNS servers’ IP address
a.b.c.d Specifies the IP address of the primary DNS server -
relevant only for the manual mode.
e.f.g.h
Specifies the IP address of the optional secondary DNS
server- relevant only for the manual mode.
Default
By default, no DNS servers are defined for the multilink interface.
Command Mode
Privileged User
Example
This example sets static DNS servers’ IP addresses on multilink interface 0:
(conf-if-multilink 0)# ip dns-server manual 10.1.1.10 10.1.1.11
To Next Page
Loading...
