AudioCodes Mediant MSBR Series User Manual

Version 7.2 361 Mediant MSBR
Reference Guide 59. gateway
Command Description
reorder-tone-duration
Global parameter configuring the duration (in
seconds) that the device plays a busy or reorder
tone before releasing the line
ring-detection-tout
Configures the timeout (in seconds) for detecting
the second ring after the first detected ring.
rings-b4-det-callerid
Number of rings after which the Caller ID is
detected.
snd-mtr-msg-2ip
{disable|enable}
Send metering messages to IP on detection of
analog metering pulses
time-wait-b4-dialing
Configures the delay before the device starts
dialing on the FXO line
waiting-4-dial-tone
{disable|enable}
Determines whether or not the device waits for a
dial tone before dialing the phone number for IP-
to-Tel calls
Command Mode
Privileged User
Example
This example configures two rings before Caller ID is sent:
(config-voip)# gateway fxo-setting
(gw-analog-fxo)# rings-b4-det-callerid 2
(gw-analog-fxo)# activate
59.2.10 fxs-setting
This command configures various FXS parameters.
Syntax
(config-voip)# gateway analog fxs-setting
(gw-analog-fxs)#
Command Description
fxs-callid-cat-brazil
Enable Interworking of Calling Party Category
(cpc) from INVITE to FXS Caller ID first digit for
Brazil Telecom.
max-streaming-calls
Defines the maximum concurrent on-
held sessions
to which the device can play Music on Hold (MoH)
originating from an external media (audio) source
connected to an FXS port.
Command Mode
Privileged User

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English