AudioCodes Mediant MSBR Series - 50 Poe-Table

Version 7.2 321 Mediant MSBR
Reference Guide 50. poe-table
50 poe-table
This command configures the Power Over Ethernet Settings table, which lets you enable
power on the Ethernet lines (PoE).
Syntax
(config-network)# poe-table < Index >
(poe-table-<Index>)# < Command >
Command Description
port-at-enable {disable|enable}
Enables PoE according to IEEE 802.3at.
port-enable {disable|enable}
Enables PoE port.
port-max-power
Configures the PoE port's maximum power.
Command Mode
Privileged User
Note
This command is applicable only to Mediant 800 MSBR.
Example
This example enables PoE on port 0:
(config-network)# poe-table 0
(poe-table-0)# port-enable enable
(poe-table-0)# port-max-power 4000