AudioCodes Mediant MSBR Series

Version 7.2 489 Mediant MSBR
Reference Guide 73. WAN Access Commands
73 WAN Access Commands
73.1 General WAN Commands
73.1.1 interface
This command enters a specific interface configuration. Use the no form of this command to
delete a specific interface.
Syntax
interface atm <group/subinterface[.vlanID[.vlanID]]>
interface bvi <bridge interface>
interface cellular <slot/port>
interface dot1radio <wifi interface>
interface dsl <slot/port>
interface e1 <slot/port>
interface efm [<slot/port>.vlanID}
interface fastEthernet <slot/port>
interface fiber <slot/port> [.vlanID][.vlanID]>
interface gigabitEthernet <slot/port[.vlanID]>
interface gigabitEthernet <slot/port>
interfcae gpon [slot/port.vlanID]
interfcae gre <Tunnel GRE ID>
interface ipip <Tunnel IPIP ID>
interface l2tp <L2TP ID>
interface loopback <Loopback interface ID>
interface multilink <Multilink interface ID>
interface serial <slot/port>
interface shdsl <slot/port>
interface pppoe <PPPoE interface ID>
interface pptp <PPTP ID>
interface t1 <slot/port>
interface vlan <vlanID>
interface vti <VTI interface ID>
Command Description
slot Defines the module slot index as shown on the front panel.
port Defines the port index within the selected module.
atm
Defines the DSL group and subinterface number,
separated by a slash (e.g., 0/0), (Vlan ID and second
vlanID are optional).
bridge interface Defines the Bridge Virtual Interface for Layer 3.
bvi Defines the BVI bridge interface (1-255).
dot1radio Defines the Wi-Fi interface (1-4).
dsl Defines the ADSL/VDSL interface and slot/port.