AudioCodes Mediant MSBR Series

Version 7.2 359 Mediant MSBR
Reference Guide 59. gateway
Syntax
(config-voip)# gateway analog enable-caller-id <Index>
(enable-caller-id-<Index>)#
Command Description
caller-id
{disable|enable|not-
configured}
Enables Caller ID.
Command Mode
Privileged User
Note
To view the port-module numbers and port type, enter the display command at the index
prompt, for example:
(enable-caller-id-0)# display
Example
This example enables caller ID:
(config-voip)# gateway enable-caller-id 0
(enable-caller-id-0)# caller-id enable
(enable-caller-id-0)# activate
59.2.8 enable-did
This command configures the Enable DID table, which lets you enable support for Japan NTT
'Modem' DID.
Syntax
(config-voip)# gateway analog enable-did <Index>
(enable-did-<Index>)#
Command Description
did {disable|enable|not-
configured}
Enables DID.
Command Mode
Privileged User
Note
To view the port-module numbers and port type, enter the display command at the index
prompt, for example: