AudioCodes Mediant MSBR Series User Manual

Reference Guide 138 Document #: LTRT-17939
Mediant MSBR
[SYSTEM Params]
SyslogServerIP = 10.31.2.44
EnableSyslog = 1
TelnetServerIdleDisconnect = 120
--MORE--
6.5 show last-cli-script-log
This command displays the contents of the latest CLI Script file that was loaded (i.e., copy
cli-script from) to the device. The device always keeps a log file of the most recently loaded
CLI Script file.
Syntax
show last-cli-script-log
Command Mode
Basic User and Privileged User
Note
If the device resets (or powers off), the logged CLI Script file is deleted.
Example
This example displays the log of the CLI Script file:
show last-cli-script-log
last-cli-script-log
---------------
# LOG CREATED ON: 26/04/2017 16:21:56
Board1_7.2_10.3.40.112# conf data
Board1_7.2_10.3.40.112(config-data)# int loopback 1
Board1_7.2_10.3.40.112(conf-if-Loopback 1)# no shut
Board1_7.2_10.3.40.112(conf-if-Loopback 1)# exit
Board1_7.2_10.3.40.112(config-data)# do no start-cli-logging-mode

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English