Reference Guide 796 Document #: LTRT-17939
Mediant MSBR
Default
TACACS+ is disabled.
Command Mode
Privileged User
Example
The example below allows bypassing TACACS+ enable authorization (privileged mode)
when a user is connected using the serial port.
(config-data)# aaa authentication login tacacs+ allow-console-
bypass authentication authorization
76.11.6 aaa accounting command start-stop tacacs+
This command enables reporting of CLI start/stop times to a TACACS+ server on the
network.
To disable TACACS+ command accounting, use the "no" form of this command.
Syntax
aaa accounting command start-stop tacacs+
Default
TACACS+ is disabled.
Command Mode
Privileged User
Example
The example below enables TACACS+ usage for command accounting.
(config-data)# aaa accounting command start-stop tacacs+
76.11.7 aaa authorization command tacacs+
This command enables usage of a TACACS+ server on the network to authorize each CLI
command entered.
To disable TACACS+ per-command authorization, use the "no" form of this command.
Syntax
aaa authorization command tacacs+
Default
TACACS+ is disabled.