AudioCodes Mediant MSBR Series User Manual

Reference Guide 760 Document #: LTRT-17939
Mediant MSBR
76.3.2 L2TP and PPTP Tunnel Interface Commands
The following describes the L2TP and PPTP Tunnel Interface commands.
76.3.2.1 description
This command sets the description on the specified tunnel interface.
Syntax
description <string>
Command Description
string
Specifies the interface description using an alphanumerical
string (up to 255 characters).
Default
NA
Note
 Use inverted commas when using the space character as part of the description.
 The string is limited to 255 characters.
Command Mode
Privileged User
Example
This example sets the description on L2TP 3.
(conf-if-L2TP 3)# description L2TP 3 interface
76.3.2.2 firewall enable
This command enables the firewall protection on the specified tunnel interface. Use the no
form of this command to disable the firewall.
Syntax
firewall enable
Default
By default, firewall is enabled.
Command Mode
Privileged User

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English