Version 7.2 229 Mediant MSBR
Reference Guide 17. http-services
17 http-services
This command configures Web (HTTP) services.
Syntax
(config-system)# http-services
(http-client-services)#
Command Description
http-remote-services
Configures the HTTP Remote Services table for
REST. For more information, see Section 17.1.
rest-debug-mode {0-3}
Configures the level of debug messages of HTTP
services, which are sent to Syslog. 0 blocks all
messages; 3 is the most detailed level.
routing-qos-status
Enables QoS-based routing by the routing server.
routing-qos-status-rate
Defines the rate (in sec) at which the device sends
QoS reports to the routing server.
Command Mode
Privileged User
To Next Page
Loading...
