AudioCodes Mediant MSBR Series User Manual

Reference Guide 378 Document #: LTRT-17939
Mediant MSBR
Command Description
num-of-digits-to-leave
Defines the number of characters that you want to keep
from the right of the calling name.
prefix-to-add
Defines the number or string to add at the front of the
calling name.
remove-from-left
Defines the number of characters to remove from the left
of the calling name.
remove-from-right
Defines the number of characters to remove from the right
of the calling name.
src-host-pattern
Defines the URI host name prefix of the incoming SIP
INVITE message in the From header.
src-ip-address
Defines the source IP address of the caller for IP-to-Tel
calls.
src-pattern
Defines the source (calling) telephone number prefix
and/or suffix.
suffix-to-add
Defines the number or string to add at the end of the
calling name.
Command Mode
Privileged User
59.5.2 calling-name-map-tel2ip
This command configures the Calling Name Manipulation for Tel-to-IP Calls table, which lets
you define manipulation rules for manipulating the calling name (i.e., caller ID) in SIP
messages for Tel-to-IP calls.
Syntax
(config-voip)# gateway manipulation calling-name-map-tel2ip
<Index>
(calling-name-map-tel2ip-<Index>)#
Command Description
calling-name-pattern
Defines the caller name (i.e., caller ID) prefix.
dst-pattern
Defines the destination (called) telephone number prefix
and/or suffix.
manipulation-name
Defines a descriptive name, which is used when
associating the row in other tables.
num-of-digits-to-leave
Defines the number of characters that you want to keep
from the right of the calling name.
prefix-to-add
Defines the number or string to add at the front of the
calling name.
remove-from-left
Defines the number of characters to remove from the left
of the calling name.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English