Version 7.2 345 Mediant MSBR
Reference Guide 58. coders-and-profiles
(audio-coders-groups-0)# audio-coders 1
(audio-coders-0/1)# name g711-alaw
(audio-coders-0/1)# rate 64
(audio-coders-0/1)# p-time 20
(audio-coders-0/1)# silence-suppression enable
(audio-coders-0/1)# activate
58.4 ip-profile
This command configures the IP Profiles table, which lets you define IP Profiles.
Syntax
(config-voip)# coders-and-profiles ip-profile <Index
(ip-profile-<Index>)#
Command Description
add-ie-in-setup
Configures an additional information element to send in
ISDN Setup message.
allowed-audio-coders-
group-name
Configures the SBC Allowed Audio Coders Group Name
(this
references a table that contains a list of allowed audio
coders).
allowed-video-coders-
group-name
Configures the SBC Allowed Video Coders Group Name
(this
references a table that contains a list of allowed video
coders).
Configures the AMD Max Greeting Time.
amd-max-post-silence-
Configures the AMD Max Post Silence Greeting Time.
Configures AMD (Answering Machine Detector) mode.
Determines the AMD level of detection sensitivity.
amd-sensitivity-
Determines the serial number of the AMD sensitivity suite.
call-limit
Configures
the maximum number of concurrent calls per IP
Profile.
Configures the CNG Detector Mode.
Configures the Coders Group Name.
copy-dst-to-redirect-
number {after-
manipulation|before-
Enables the device to copy the called number, received in
the SIP INVITE message, to the redirect number in the
outgoing Q.931 Setup message, for IP-to-Tel calls.
disconnect-on-broken-
Configures the behavior when receiving an RTP broken
notification.
early-answer-timeout
Configures the maximum time (in seconds) to wait from
sending a setup message to the PSTN to receiving a
connect message from the PSTN.