AudioCodes Mediant MSBR Series - Settings

Version 7.2 439 Mediant MSBR
Reference Guide 66. qoe
Command Description
alt-ip-profile-name
Assigns a different IP Profile to the IP Group or call
(depending on the 'Rule Metric' parameter) if the rule is
matched.
calls-reject-duration
Defines the duration (in minutes) for which the <device>
rejects calls to the IP Group if the rule is matched.
ip-group-name
Assigns an IP Group.
rule-action
{alternative-ip-
profile|reject-calls]
Defines the action to be done if the rule is matched.
rule-metric
{acd|asr|bandwidth|ner|
poor-invoice-
quality|voice-quality}
Defines the performance monitoring call metric to which
the rule applies if the metric's threshold is crossed.
severity {major|minor}
Defines the alarm severity level.
Command Mode
Privileged User
Example
This example configures a Quality of Service rule that rejects calls to IP Group "ITSP" if
bandwidth severity is Major:
(config-voip)# qoe quality-of-service-rules 0
(quality-of-service-rules-0)# ip-group-name ITSP
(quality-of-service-rules-0)# rule-action reject-calls
(quality-of-service-rules-0)# rule-metric bandwidth
(quality-of-service-rules-0)# severity major
(quality-of-service-rules-0)# activate
66.5 settings
This command configures SEM parameters.
Syntax
(config-voip)# qoe settings
(qoe)#
Command Description
interface-name
Defines the IP network interface on which the quality
experience reports are sent.
redundant-server-ip
Defines the IP address of the secondary SEM server to
where the quality experience reports are sent.
report-mode {during-
call|end-call}
Defines at what stage of the call the <device> sends the
QoE data of the call to the SEM server.