AudioCodes Mediant MSBR Series User Manual

Version 7.2 409 Mediant MSBR
Reference Guide 61. interface
61.3 fxs-fxo
This command configures FXS and FXO interfaces.
Syntax
(config-voip)# interface fxs-fxo
(fxs-fxo)#
Command Description
analog-port-enable
Enables the analog port.
bellcore-callerid-
type-one-sub-standard
Selects the sub-standard of the Bellcore Caller ID type.
bellcore-vmwi-type-
one-standard
Defines the Bellcore VMWI standard.
caller-id-timing-mode
Defines the Analog Caller ID Timing Mode.
caller-id-type
Defines the Caller ID standard.
current-disconnect-
duration
Defines the current-disconnect duration (in msec).
default-linepolarity-
state
Sets the default line polarity state.
disable-analog-auto-
calibration
Determines whether to enable the analog Autocalibration
in the DAA.
enable-analog-dc-
remover
Determines whether to enable the analog DC remover in
the DAA.
enable-fxo-current-
limit
Enables loop current limit to a maximum of 60mA (TBR21)
or disables the FXO line current limit.
etsi-callerid-type-
one-sub-standard
Selects the number denoting the ETSI CallerID Type 1
sub-standard.
etsi-vmwi-type-one-
standard
Selects the number denoting the ETSI VMWI Type 1
Standard.
far-end-disconnect-
type
Sets the source for the
acEV_FAR_END_DISCONNECTED event.
flash-hook-period
Defines the flashhook detection and generation period (in
msec).
fxo-country-
coefficients
Line characteristic (AC and DC) according to country.
fxo-dc-termination
Defines the FXO line DC termination.
fxs-country-
coefficients
Defines the line characteristic (AC and DC) according to
country.
fxs-line-testing
Execute line testing
fxs-rx-gain-control
Defines gain\attenuation of the FXS Rx path between -
17db and 18db.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English