AudioCodes Mediant MSBR Series User Manual

Reference Guide 408 Document #: LTRT-17939
Mediant MSBR
Command Description
ovrlp-rcving-type
Select reception type of overlap dialing from ISDN side
pi-in-rx-disc-msg
Configure PIForDisconnectMsg to overwrite PI value
received in ISDN Disconnect message
pi-to-isdn
Override the value of progress indicator to ISDN side in
ALERT PROGRESS and PROCEEDING messages
play-rbt-to-trk
Enable ringback tone playing towards trunk side. Refer to
User's Manual for details
protocol
Sets the PSTN protocol to be used for this trunk.
pstn-alrt-timeout
Max time (in seconds) to wait for connect from PSTN
rmv-calling-name
Remove Calling Name For Trunk.
trace-level
Set the trunk trace level
trk-xfer-mode-type
The type of transfer the PSTN/PBX supports
Command Mode
Privileged User
Example
This example configures E1/T1 to E1 EURO ISDN protocol type (1):
(config-voip)# interface e1-t1 1/1
(e1-t1 1/1)# protocol 1
(e1-t1 1/1)# activate

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English