Reference Guide 188 Document #: LTRT-17939
Mediant MSBR
admin register accounts <Account Index>
Registering Gateway:
admin register gw
Registration per physical port:
admin register ports <Module Number> <Port Number>
Registration by extension number:
admin register suppserv <Extension Number>
Registration by User Info table:
admin register userinfo {gw|sbc} <Local User>
Command Description
Registers user Accounts, configured in the Accounts table.
Registers the device as a single entity (Gateway).
ports
Registers the device's ports. You need to specify the
module number and port number.
suppserv
Registers an FXS endpoint by phone number and BRI line
extensions configured in the Supplementary Services table.
Registers users configured in the User Info table.
Note
To unregister, use the below command:
admin unregister {accounts|gw|ports|suppserv|userinfo}
Command Mode
Privileged User
Example
Registering port 1 located on module 3:
admin register ports 3 1
Registering module 3 port 1 (200)
8.1.2 admin state
This command locks and unlocks the device.
Syntax
Locks the device:
# admin state lock {graceful <timeout>|no-graceful}
Unlocks the device:
# admin state unlock