AudioCodes Mediant MSBR Series User Manual

Version 7.2 319 Mediant MSBR
Reference Guide 49. nqm
49.3 nqm sender-table
This subcommand adds a sender (including RTT, PL, and jitter thresholds; associates
probing definition; responder address; local interface).
Syntax
(config-network)# nqm sender-table < Index >
(sender-table-<Index>)# < Command>
Command Description
active {0|1}
Enables the Sender.
cq-mos-threshold
Configures the minimum allowable Conversation Quality
MOS.
jitter-threshold
Configures the maximum allowable Jitter (msec).
lq-mos-threshold
Configures the minimum allowable Listener Quality MOS.
packet-interval
Configures the interval between each packet transmitting
(msec).
packet-timeout
Configures the receive timeout on expected packets.
packet-tos
Configures the TOS value in the IP header.
payload-size
Configures the size of the IP payload (bytes).
pl-threshold
Configures the maximum allowable Packet Loss.
probe-name
Configures the name of the corresponding probe in the
Probing table.
rtt-threshold
Configures the maximum allowable Round Trip Time
(msec).
sender-name
Configures a descriptive name for the Sender.
source-interface-name
Configures a name for the source interface.
target-ip-address
Configures the target IP address.
target-port
{3900|3910|3920|3930|3
940|3950|3960|3970|398
0|3990}
Configures the target transport layer port number.
Command Mode
Privileged User
Example
This example configures a row in the Sender table to define a sender termination:
(config-network)# nqm sender-table 0
(sender-table-0)# sender-name main_office_voip_checker_1
(sender-table-0)# set target-ip 10.4.3.98
(sender-table-0)# set target-port 3900

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English