AudioCodes Mediant MSBR Series User Manual

Reference Guide 112 Document #: LTRT-17939
Mediant MSBR
6.3.15 show data ethernet
This command displays status information about CFM (Connectivity Fault Management).
Syntax
show data ethernet
Command Description
cfm {legend}
Displays the status of the CFM (IEEE 802.1ag)
standard defined by IEEE for local and metropolitan
area networks virtual bridged local area networks.
 legend (Displays descriptions of errors)
oam
{brief|configuration|
counters|interface
<fiber slot/port>
<gigabitethernet
slot/port>|
status}
Displays status information about OAM (Operations,
Administration, and Maintenance) protocols and
practices defined by IEEE 802.3ah for paths through
802.1 bridges and LANs.
 brief (Displays information about the Ethernet OAM
brief)
 configuration (Displays information about the
Ethernet OAM configuration)
 counters (Displays information about the Ethernet
OAM counters)
 interface

fiber slot/port (Displays information about the
fiber interface)

gigabitethernet slot/port (Displays information
about the Gigabit Ethernet interface)
 status (Displays status information about the
Ethernet OAM)
y1731
Displays the status of ITU-T's Recommendation Y.1731
which addresses performance monitoring.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays CFM status including descriptions of errors:
show ethernet
show data ethernet cfm legend
Local MEPs:
MPID VLAN RmtRDI MAC Remote XCON RmtAIS RmtLCK
--------------------------------------------------------

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English