AudioCodes Mediant MSBR Series User Manual

Reference Guide 580 Document #: LTRT-17939
Mediant MSBR
Related Commands
switchport mode
Example
This example adds VLAN 3 to the VLAN trunk defined for GigabitEthernet 4/2:
(conf-if-GE 4/2)# switchport trunk allowed vlan add 3
74.2.8.4 switchport trunk native vlan
This command sets the native VLAN to the interface when set to Trunking mode.
Syntax
switchport trunk native vlan <vlan id>
Command Description
<vlan id> Specifies a valid VLAN interface ID. Range is 1 to 3999.
Default
This is set to VLAN 1 (the default VLAN).
Note
 VLAN ID values range from 1 to 3999.
 Configure which VLAN the interface uses as its native VLAN when in Trunking mode.
Packets from this VLAN leaving the interface will not be tagged with the VLAN number.
Any untagged packets received on the interface are considered to be tagged with
VLAN ID.
Command Mode
Privileged User
Related Commands
switchport mode
Example
This example sets the native VLAN on GigabitEthernet 4/2 to 3.
(config-data)# interface gigabitethernet 4/2
(conf-if-GE 4/2)# switchport trunk native vlan 3

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English