EasyManua.ls Logo

AudioCodes Mediant MSBR Series

AudioCodes Mediant MSBR Series
801 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Guide 626 Document #: LTRT-17939
Mediant MSBR
Syntax
priority <priority value>
Command Description
priority value Defines the priority value in the range of 0 to 7.
Default
NA
Note
This command is applicable only to data-router functionality.
Command Mode
Privileged User
Example
This example configures the wan output service map priority to 4.
(conf-s-map-q)# priority 4
75.1.7.19 queue
This command enters a specific queue configuration. Use the no form of this command to
delete a specific queue.
Syntax
queue <queue name>
queue default
Command Description
queue name Defines the name of the queue to configure.
default Defines the behavior of traffic when it doesn’t match any
queue.
Default
NA
Command Mode
Privileged User
Example
This example enters a wan output service map queue called sip_wan_outgoing configuration
menu.

Table of Contents

Other manuals for AudioCodes Mediant MSBR Series

Related product manuals