Reference Guide 98 Document #: LTRT-17939
Mediant MSBR
Note
This command is applicable only to data-router functionality.
6.3.1 show data access-lists
This command displays configured access lists.
Syntax
show data access-lists
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example demonstrates how to view configured access lists:
show data access-lists
6.3.2 show data arp
This command displays all Address Resolution Protocol (ARP) entries in the cache.
Syntax
show data arp
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays all ARP entries in the cache:
show data arp
IP Address MAC Address Interface Type
172.17.141.1 64:64:9b:3b:6a:81 VLAN 1 DYNAMIC
End of arp table, 1 entries displayed.
6.3.3 show data backup-group