AudioCodes Mediant MSBR Series User Manual

Version 7.2 391 Mediant MSBR
Reference Guide 59. gateway
Command Description
forward-dst
Defines the alternative IP destination for the call used if the
Trunk Group is busy or unavailable.
trunk-group-id
Defines the Trunk Group ID to where the IP call is
destined.
Command Mode
Privileged User
Example
This example configures 10.15.7.96 as the alternative destination for calls destined for Trunk
Group 1:
(config-voip)# gateway routing fwd-on-bsy-trk-dst 0
(fwd-on-bsy-trk-dst-0)# forward-dst 10.15.7.96
(fwd-on-bsy-trk-dst-0)# trunk-group-id 1
(fwd-on-bsy-trk-dst-0)# activate
59.6.4 gw-routing-policy
This command configures the Routing Policies table, which lets you edit the default Routing
Policy rule.
Syntax
(config-voip)# gateway routing gw-routing-policy <Index>
(gw-routing-policy-<Index>)#
Command Description
lcr-call-length
Defines the average call duration (in minutes) and is used
to calculate the variable portion of the call cost.
lcr-default-cost
Defines whether routing rules in the Tel-to-IP Routin
g table
that are not assigned a Cost Group are considered a
higher cost or lower cost route compared to other matched
routing rules that are assigned Cost Groups.
lcr-enable {disabled|
enabled}
Enables the Least Cost Routing (LCR) feature for the
Routing Policy.
ldap-srv-group-name
Assigns an LDAP Server Group to the Routing Policy.
name
Defines a descriptive name, which is used when
associating the row in other tables.
Command Mode
Privileged User

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English