AudioCodes Mediant MSBR Series - Audio-Coders

Reference Guide 344 Document #: LTRT-17939
Mediant MSBR
Command Description
coders-group-name
Defines a name for the Coders Group.
audio-coders
Defines the Coder Groups table, which lets you define
audio coders. For more information, see Section
58.3.1.
Command Mode
Privileged User
Example
This example configures the name "ITSP" for the Coders Group table:
(config-voip)# coders-and-profiles audio-coders-groups 0
(audio-coders-groups-0)# coders-group-name ITSP
(audio-coders-groups-0)# activate
58.3.1 audio-coders
This command configures the Coder Groups table, which lets you define audio coders. The
table is a "child" of the Audio Coders Groups table.
Syntax
(config-voip)# coders-and-profiles audio-coders-groups <Index>
(audio-coders-groups-<Index>)# audio-coders <Index>
(audio-coders-<Index>/<Index>)#
Command Description
coder-specific
Defines additional settings specific to the coder.
name
Defines the coder type.
p-time
Defines the packetization time (in msec) of the coder.
payload-type
Defines the payload type if the payload type (i.e.,
format of the RTP payload) of the coder is dynamic.
rate
Defines the bit rate (in kbps) of the coder.
silence-suppression
{disable|enable|enable-
no-adaptation|not-
configured}
Enables silence suppression for the coder.
Command Mode
Privileged User
Example
This example configures the Audio Coders table with G.711:
(config-voip)# coders-and-profiles audio-coders-groups 0